Digital temperature sensor with outstanding accuracy over a wide temperature range. The sensor is equipped with one G1/4 inner thread and one G1/4 outer thread with o-ring seal and can be installed directly between water block/radiator and hose fitting.
An aquaero 5 or aquaero 6 device with firmware version 2100 or newer is required to use this sensor, the sensor has to be connected to the aquabus connector of the aquaero. The aquaero supports a single Calitemp sensor without further hardware, alternatively a maximum of four Calitemp sensors can be connected to a single aquaero using an "aquabus X4" (product code 53258, not included in delivery).

Rated absolute accuracy of the digital sensor chip used for Calitemp:
-40 °C to -20 °C: +/- 1 °C
-20 °C to -5 °C: +/- 0.5 °C
-5 °C to 50 °C: +/- 0.2 °C
50 °C to 100 °C: +/- 0.5 °C
100 °C to 125 °C: +/- 1 °C
Sensor resolution: 0.01 °C

Technical details:
Threads: G1/4
Body material: Nickel plated brass
Cover material: Silicone
Height when installed: 16 mm

Scope of delivery:
Calitemp sensor
aquabus cable

Compatible with:
aquaero 5 XT/PRO/LT, firmware version 2100 or newer, aquasuite 2018-1 or newer
aquaero 6 XT/PRO/LT, firmware version 2100 or newer, aquasuite 2018-1 or newer
Starting with version 2017, all versions of the aquasuite require a valid license/activation. A valid license/activation for aquasuite version 2018 or newer is required for this sensor or can be bought separately with additional cost.