Products description
All reservoirs of the aqualis series are equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube of the 100 ml and 150 ml variants has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aqualis reservoirs are made from Delrin and connected by a stainless steel rod. A deflector plate is installed above the return channel into the reservoir to effectively remove air from the water circuit.
The aqualis XT 100/150 ml variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5/6 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors.
All 100 ml and 150 ml variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube.
Technical details:
Dimensions without stainless steel bracket: approx. 50 x 50 x 175 mm
Filling volume: approx. 150 ml
Connection threads: G1/4
Recess around connection threads of the base part: Diameter 25 mm, depth 20 mm (Connectors with larger outer diameter can only be installed with suitable extensions, not included in delivery.)
Recess around connection threads of the lid: Diameter 23 mm, depth 3 mm (Connectors with larger outer diameter can only be installed with suitable extensions, not included in delivery.)
Scope of delivery:
One Reservoir
One stainless steel bracket
Two sealing screws G1/4 (preinstalled)
Mounting material
Please note: Fittings are not included in delivery, please order seperately.
The aqualis XT 100/150 ml variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5/6 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors.
All 100 ml and 150 ml variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube.
Technical details:
Dimensions without stainless steel bracket: approx. 50 x 50 x 175 mm
Filling volume: approx. 150 ml
Connection threads: G1/4
Recess around connection threads of the base part: Diameter 25 mm, depth 20 mm (Connectors with larger outer diameter can only be installed with suitable extensions, not included in delivery.)
Recess around connection threads of the lid: Diameter 23 mm, depth 3 mm (Connectors with larger outer diameter can only be installed with suitable extensions, not included in delivery.)
Scope of delivery:
One Reservoir
One stainless steel bracket
Two sealing screws G1/4 (preinstalled)
Mounting material
Please note: Fittings are not included in delivery, please order seperately.
This Product was added to our catalogue on 04/07/2013.
Manufacturer Information
Contact Manufacturer
Aqua Computer GmbH & Co. KG Gelliehäuser Str. 1
37130 Gleichen
Germany
info@aqua-computer.de
Anschlüsse
A product slider follows - navigate to the individual items using the Tab key.

Coupling 10/8 mm G 1/4 with O-gasket

Coupling 8/6 mm G 1/4 with O-gasket

Coupling 11/8 mm G 1/4, straight

Coupling 13/10 mm G 1/4 with O-gasket

Straight plug&cool fitting G 1/4
This product is compatible with:
A product slider follows - navigate to the individual items using the Tab key.

RGBpx LED ring for aqualis 100/150, 10 addressable LEDs

LEAKSHIELD leak prevention system for aqualis/aquainlet 100/150

Mounting kit aqualis/aquainlet 100/150 for LEAKSHIELD
Customers who bought this product also bought the following products:
A product slider follows - navigate to the individual items using the Tab key.

Hose Tygon R6012 Norprene 13/10 mm black

Feedthrough coupling with cap nuts 10/8 mm

ULTITUBE D5 200 PRO LEAKSHIELD reservoir with D5 NEXT pump and leak prevention system

Decoupling set for aquastream ULTIMATE and aquastream XT

Eheim 1046 / Eheim universal 300 and aquastream XT/ULTIMATE pump cover

Gasket 36 x 2 mm for pump cover 1046 and aquastream
Last viewed:
A product slider follows - navigate to the individual items using the Tab key.
